|
| Application; | |
|
The tiles must be completely clean and free of all lichen, moss, grease, oil, dirt, and other contaminants. To kill moss, mould, lichen, and fungi, apply ether Nutech Hypo or Orgo-Clean at least 2 hours before pressure water cleaning (>2500 PSI). DO NOT use acidic cleaning product before application of Nutech TerraGlaze. Remove all loose mortar, leaves , and other foreign material before applying two coats of TerraGlaze. |
|
| Features & Benefits: | |
![]() |
|
|
Warnings: |
|
|
TerraGlaze is NOT recommended for GLAZED or Fully GLAZED, Vitreous terracotta tiles. DO NOT apply on very hot surfaces. Avoid inhalation of product vapours, especially while spraying. As TerraGlaze is flammable, keep away from naked flames and heat. |
| Important Note: | |
| The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual case. |