GP Primer
   
Description:
 

GP Primer is a general purpose primer designed to adhere to a wide range of roof surfaces including smooth, glossy and rough cement roof tiles. Formulatated from high quality adhesion promoted acrylic resins, GP primer is ideally suited as a filler coat on very rough cement tiles because of its high solids content, improving the gloss appearance and coverage of all Nutech top coating systems. DO NOT use GP Primer on powdery or oxidising tiles. (refer Nutech Nu-Prime)

  
  Typical Properties:
  Appearance: Light grey viscous liquid
  Total Solids: 65%
  pH: 9.0
  Specific Gravity: 1.25
  Water Solubility Soluble
  Min Film Forming Temp: 15 Degrees celsius
  Min Film Thickness: 130 microns (1 coat )
  Application Rate:

 

1coats @ 4 m2 per litre

  Applications:
 

GP Primer is a high quality primer undercoat designed for stable tile surfaces. Because of the high resin solids good dry film build is possible on very porous aggregate exposed tile surfaces. Rough tile surfaces primed with GP Primer develop excellent gloss and colour appearance.
  Features:
 

GP Primer is recommended an an undercoat for cement tiles, painted surfaces, and new roof tiles. GP Primer is a high solids adhesion undercoat recommended for TileFlex, NuFlex or Coloufast top coating systems.

GP Primer is a low sheen waterbased coating with excellent durability and adhesion performance. Surfaces primed with GP Primer and top coated with Nutech 100% acrylic system perform exceptionally providing years of maintenance free service.

GP Primer is a non-toxic, non-flammable and faster drying making application safer and easier. On smooth surfaces coverage is also greatly increased improving economy.

GP Primer has been developed following years of research and development to formulate an undercoat which will adhere to a wide range of roofing surfaces and enhance the appearance of top coat systems. GP Primer has been developed for Australian, New Zealand, South-East Asian and UK environmental conditions.

GP Primer provides excellent protection against biological growth including moss, lichen, mould and fungus.
  Benefits:
 
  • High Solids For Maximum Film Build and Filler
  • Guaranteed Surface And Intercoat Adhesion
  • High Degree of Mould, Fungus and Lichen Resistance
  • 100% Waterproof Performance
  • Easy Application By Brush, Roller, Or Spray Unit
  • Ultra-Violet Radiation Resistant
  • Desirable For Extremelly Porous Rough Tile Surfaces
  • fully Compatible With TileFlex, NuFlex and Colourfast
  Important Note:
  The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual case.