Nu EcoSafe Strip – Industrial High Strength Degreaser

Water-Based Heavy Duty Cleaner

Nu EcoSafe Strip Industrial High Strength Degreaser is a heavy duty cleaner that is biodegradable, user-friendly and environmentally safe. It is extremely effective for commercial, residential, automotive and the marine industry.

Super Concerntrated Formula

Nu EcoSafe Strip Industrial High Strength Degreaser has the following qualities:

  • Quickly cuts through grease, industrial soils and petroleum-based liquid products
  • Can be used as a Varsol® and solvent substitute; it's power and versatility will tackle all of your cleaning and degreasing needs
  • Is safe for use in parts washers, steam cleaners and hot or cold pressure washers
  • Will replace many specialized cleaning and degreasing products.

Nu EcoSafe Strip Industrial High Strength Degreaser is suitable for the following projects:

  • Concrete driveways
  • Garage floors
  • Engine & Machinery parts
  • Wheels & Rims
  • Shop walls
  • Lockers
  • Barbecues
  • Stove tops
  • Lawn mowers
  • Chain saws
  • Saw blades
  • Tools
  • Fireplaces

Nu EcoSafe Strip Industrial High Strength Degreaser has the following qualities:

  • Water-based
  • Biodegradable
  • Non-flammable
  • Non-abrasive
  • No phosphate or Chlorine
  • Contains no TAPs or HAPs (Toxic/Hazardous Air Pollutants)
  • Easy clean up with running water
  • Non ozone depleting
  • As quick as conventional products

Applications & Features

Preparation

Ensure that all project surfaces are dry, remove all loose material.

For Concrete

DO NOT DILUTE.

For All Purpose Cleaner Mix

Add 4 litre of water to 1 litre of Nu EcoSafe Strip Industrial High Strength Degreaser as an all purpose cleaner. Solution can be adjusted according to specific cleaning needs.

Test Patch

Conduct a small test on an inconspicuous area to ensure product performance. This will indicate the time required and dilution rate for project completion and suitability of product for the substrate.

Application Guidelines

Application Procedure

Use brush, hand sprayer, pump style garden sprayer or chemical applicator.

Coverage

1 to 12 sq.m/L depending on degree of soiling.

Removal & Clean Up

Clean all surfaces using a brush, mop, sponge or pressure washer. Wash vertical surfaces from the top down. Thoroughly rinse all project surfaces.

Disposal

Dispose of waste product in accordance with applicable environmental regulations.

Safety Precautions

Avoid ingestion, skin and eye contact. Wear eye protection and rubber or synthetic gloves.

When applying product using spray applicators wear NIOSH approved respirator. In case of eye or skin irritation, flush with cold water for 15 minutes. If swallowed do not induce vomiting, seek immediate medical attention.

Dispose of product in accordance with applicable environmental regulations. When using the soap injector line of a pressure washer, be sure to measure dilution ratios according to the setting of the intake valve.

Refer to the Material Safety Data Sheet for important health and safety information before use.

Important Note

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.