PaveCoat

Australia’s Number 1 Concrete Sealer

PaveCoat is a superior-quality, solvent-based acrylic penetrating sealer that has earned the distinction of being Australia’s leading concrete sealer. Designed for diverse functional, decorative, and protective concrete applications, PaveCoat provides exceptional sealing, colouring, and safeguarding of concrete surfaces, rendering them long-lasting and economical. Its high-performance formula offers robustness to withstand pedestrian and light vehicular traffic. At the same time, its aesthetic appeal makes it an ideal choice for enhancing the appearance of new and old concrete. PaveCoat is available in standard gloss and matte finishes to meet its customers’ unique requirements.

Applications

PaveCoat concrete sealer is manufactured from acrylic polymer resin and is stabilised for all types of concrete, including:

  • Paving
  • Driveways
  • Factories
  • Workshop floors
  • Service Stations
  • Tilt slab construction
  • Asbestos and cement sheeting
  • Slate flooring
  • Concrete roof tiles.

PaveCoat clear and colours are recommended for:

  • Plain concrete
  • Pattern paving
  • Stamped impression paving
  • Stencil paving
  • Spray on finish paving.

PaveCoat is highly durable and resistant to oil and most chemicals.

For improved resistance to petrochemicals, refer to PaveCoat Petrol Resistant.

Features

  • Available in clear and 29 standard colours
  • Can be custom colour-matched upon request
  • Excellent UV light resistance
  • Resistant to fading
  • Non-yellowing
  • Resistant to oil and grease

Click Here to find out where to buy this product.

DOWNLOAD BROCHURE

VIEW COLOUR CHART

Application Guide

For detailed substrate preparation and application steps, please download the full application guide.

Preparation

Prepare surfaces using EcoSafe Etch and Nu-EcoSafe Ultra Etch, and pressure wash prior to PaveCoat application.

Equipment

Roller or Brush.

Conditions

10°C to 30°C ambient, dry conditions.
Do not apply if Rain is likely within 12 hours; it is late in the day or early in the morning. Failure to observe these directions can result in coating damage and surface clouding.

Application

• Thin per the surface profile.
• Apply two even coats observing recoat and drying times.

 

DOWNLOAD CARE & MAINTENANCE FORM

Warnings

Do not park vehicles on sealed concrete for a minimum of 7 days.

PaveCoat
Quick Reference

Suitable Surfaces

Concrete Slabs

Appearance:

Clear colourless or coloured viscous liquid

Solubility:

PaveCoat Thinners

Film Forming Temperature:

10°C

Dry Film Thickness:

65 microns

Coats Required:

2 Coats

Recoat Time:

2 Hours

Touch Dry:

30 Minutes

Full Cure:

7 Days

Colours:

29 Standard Colours

Flammability:

Highly Flammable

Gloss Levels:

Gloss, High Gloss and Matt

Ambient Application Temperature:

10°C - 30°C

Coverage Rate:

4 - 6 m2/L

Properties

Suitable for Vehicles

Clear Finish

Coloured Finish

Solvent Based

In The Blog:

Related Products:

Download PaveCoat Application GuideDownload PaveCoat TDSDownload PaveCoat SDS
Important Notice

The information given in this data sheet is based on many years experience and is correct to the best of our knowledge. However as the use of our product is beyond our control we can only be responsible for the quality of our product at the time of dispatch. For additional information about specifications or application please contact our company. As this information is of a general nature we cannot assume responsibility for individual use.